US holds in UN Committee 661: "Smart" Sanctions
Since the U.N. adopted economic sanctions in 1945, in its charter, as a means of maintaining global order, it has used them fourteen times (twelve times since 1990). But only those sanctions imposed on Iraq have been comprehensive, meaning that virtually every aspect of the country's imports and exports is controlled, which is particularly damaging to a country recovering from war. The itemized list [2M] of US holds in the Iraq Oil for Food Program used to produce these results comes from an accidentally released 661 Committee contract report from March 2001 that gave line item details on approved and withheld sales for the Oil for Food program from 1997 up to when the report was released. The original spreadsheet and details about the report and its release can be found here, and more commentary on the attempts to publish it here, credit for publishing the data goes to Drew Hamre. All I've done is code a simple perl script that checks against goods and "reason for non-compliance". "Header Status" reflects status as of March 2001. The intention of the US seems clearly, during the Gulf War and during the sanctions program, to have been to make living in Iraq impossible and to lay the blame for the suffering entirely at the feet of Saddam Hussein: the effects of sanctions would be part of a propaganda campaign for the US policy of 'regime change'. The policy resulted in massive numbers of premature deaths: from the purposeful destruction of water treatment facilities and other civillian infrastructure during the Gulf War and then blocking or holding up supplies required to repair and maintain them; the blocking of medical supplies; the malnourishment from an underfunded Oil for Food program that was used, at the same time, to pay off war reparations to the Princes of Kuwait; the prevention of other reconstruction of essential civillian infrastructure for 12 years. By 1999 the infant mortality rates more than doubled from their rates previous to the Gulf War. The State Department has never attempted to explain what change in policy Saddam made with respect to child health-care that might have resulted in such a rate increase: the answer why is obvious, because it was entirely the direct result of US and UNSC policy. How many died, exactly, will never be known - if the lower estimates are taken there is clear evidence for serious crimes against humanity, if the upper estimates are taken it could be easily argued as a case of genocide. The range of credible estimates is in the hundreds of thousands to the millions. None of the four men most responsible for the sanctions policy - George H. W. Bush, Bill Clinton, George W. Bush (least of the four), and Saddam Hussein - have been indicted for it. For more information on the sanctions program visit CASI. For more information about the Oil For Food program visit Oil For Food Facts. |
Hold by | Header Status | Goods | Amount | Reason for non-compliance or hold | Received | Mission | Exporter |
---|---|---|---|---|---|---|---|
The United Kingdom; The United States | On Hold | MEDICAL EQUIPMENT PARTS | "$94,157.28 " | US: for composition material of electric pumps and technical specs on bacteriologic filter; UK: technical specs requested for all equipment | 05-May-99 | France | Subtil Crepieux |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$530,493.00 " | For technical specs on #2 phosphate pump and #5 hydrazine pump. | 06-Apr-99 | France | Ksb Sa |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$233,888.54 " | for material composition of pumps | 12-Apr-99 | Cyprus | Voith Middle East Ltd. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$219,749.51 " | For technical specs on items 11 & 12 specifically composition of material. | 12-Apr-99 | Cyprus | Voith Middle East Ltd. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$59,600.00 " | goods on 1051 list | 12-Apr-99 | India | M/S. Sehra Pumps Pvt. Ltd. |
The United States | On Hold | PUMP/PARTS | "$909,450.00 " | items 1-2 have dual use concerns & are on the 1051 list | 08-Jun-99 | India | Mather & Platt Engineering Center (Uk) Ltd. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$228,254.89 " | for material composition of pumps | 11-Jun-99 | Cyprus | Voith Middle East Ltd. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$68,601.00 " | "need additional info on pumps, inlets & outlets; are they corrosive resistant?" | 01-Jul-99 | France | Ksb Sa |
The United States | On Hold | CENTRIFUGAL PUMPING SYSTEM | "$450,000.00 " | for end use/user info - stainless steel pumps on 1051 list | 20-Jul-99 | China | Shandong Weichai Imp. & Exp. Corp. |
The United States | On Hold | PUMPS | "$305,000.00 " | all items are on the 1051 list | 08-Nov-99 | China | Shandong Weichai Imp. & Exp. Corp. |
The United States | On Hold | IRRIGATION SYSTEMS ; PUMPS; PIPES | "$411,046.80 " | "US: boreline pipes are on 1051 list as tab 10, p12, 10.4.3; " | 21-Aug-00 | UAE | Al-Huda Spare Parts Co. |
The United States | On Hold | GOODS FOR REHABILITATION OF BOILERS | "$1,057,662.00 " | "Need verification that material composition of steam heater (item 11) should be Cr 18%, Ni 10% instead of Sr 18%, Ni 10%; need description for operation & use of agitator including drawings (item 17); need specs for pumps including dimensions, weight, typ" | 07-Dec-00 | Russian Federation | Technopromexport |
The United States | On Hold | SPARE PARTS | "$1,122,036.42 " | for materials composition of pumps and exact end use/user | 09-Aug-99 | Austria | Hitzinger |
The United Kingdom; The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$110,135.00 " | "US: Goods are on the 1051 list as indicated by the Secretariat. UK: need tech specs for pumps (items 1-5), in particular types & designs; monitoring may be required" | 09-Sep-99 | India | Sehra Pumps Pvt. Ltd |
The United States | On Hold | TRUCK TANKERS/PARTS | "$1,122,000.00 " | "For technical specs. on sledge pump repair kits, what is the composition of lining of the tanker and detailed end-use/user information." | 04-Oct-99 | Egypt | El Nasr Automotive Manufacturing Co. |
The United States | On Hold | CENTRIFUGAL PUMPING SYSTEM | "$2,562,000.00 " | item 1 is on 1051 list | 20-Jul-99 | China | Shandong Weichai Imp. & Exp. Corp. |
The United States | On Hold | EXCAVATORS & SPARE PARTS | "$8,419,500.00 " | "for end use/user info, technical specs on the 9 engines and material composition of the shafts, pumps and valves" | 02-Sep-99 | China | China State Const. Engineering Corp. |
The United States | On Hold | PUMPS; COMPRESSOR; ROTATING MACHINES | "$76,554.00 " | For technical specs and detailed end-use/user information - goods on 1051 list. | 22-Oct-99 | Spain | Allweiler |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$888,930.13 " | "technical specs on item 2.13, items 1-6 on 1051 list" | 29-Oct-99 | France | Cis-Paris |
The United States | On Hold | COMPACT UNITS | "$12,600,000.00 " | for tech specs on gas mask & what type/grade stainless steel are the pumps? | 02-Nov-99 | Macedonia (FYROM) | Makfluid D.O.O. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$1,880,400.00 " | US: goods are WMD dual use | 02-Nov-99 | Switzerland | Ingersoll-Rand World Trade Ltd |
The United Kingdom; The United States | On Hold | T.V. STATION EQUIPMENT | "$1,945,401.50 " | "US: provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, inlet/outlet pressure, rotation speed and drawings (items #1.4.53 and #1.4.79); provide specifications for all valves includi" | 20-Dec-99 | Jordan | Al-Baha Establishment For Applications |
The United States | On Hold | DOSING PUMPS W/ SPARE PARTS | "$120,539.00 " | "Pumps on 1051 list at tab 10, pg 12, para 10.4.2. Need material composition of pumps" | 22-Dec-99 | Jordan | Carmel Air Conditioning And Refrigeration |
The United Kingdom; The United States | On Hold | PUMPS | "$494,585.00 " | "US: goods on 1051 list as indicated by Sec't; UK: require exact end use/user details for these goods, in particular items 5-9" | 28-Jan-00 | India | Beni Impex |
The United States | On Hold | CONCRETE PUMP TRUCK/PARTS | "$659,989.00 " | "Provide the previously requested specifications on the pumps including dimensions, weight, material composition for all components and linings, and drawings; provide the previously requested information on whether the large tank is lined; provide the prev" | 28-Jan-00 | UAE | Xuzhou Construction |
The United States | On Hold | PUMPS AND SPARE PARTS | "$78,000.00 " | US: goods on 1051 list as indicated by Sec't; | 28-Jan-00 | Turkey | Mpe Engineering Consulting |
The United States | On Hold | SUBMERSIBLE PUMPS | "$690,000.00 " | "tech specs, material composition and lining of pump CS3306/765; detailed end use/user" | 07-Mar-00 | Sweden | Itt Flygt Ab/Flygt International |
The United States | On Hold | EXCAVATORS & SPARE PARTS | "$2,049,840.00 " | tech specs on #13 (injection pump) | 18-Apr-00 | China | "Shanghai Dongfeng Machine Group, Inc." |
The United States | On Hold | SPARE PARTS FOR WAILIA GRAIN SILO | "$11,105,000.00 " | " provide previously requested technical information on the universal cleansing machine (item #16) including manufacturer's data sheets, material composition for all tanks, and tech specs for any pump and sieves; provide previously requested technical inf" | 02-Jul-99 | Germany | Nbc Industrieanlagen Gmbh |
The United Kingdom; The United States | On Hold | AIR COMPRESSORS | "$447,510.00 " | US: goods on 1051 list as indicated by Sec't; UK: require detailed end-use info for item 3 (impex-rated complete cetrifugal pump) | 14-Jun-00 | India | Beni Impex |
The United States | On Hold | PUMP SET W/ ELECTRICAL MOTORS & ACCESSORIES | "$320,000.00 " | for tech specs | 09-Aug-00 | Russian Federation | "Jsc ""Intermach & Co.""" |
The United States | On Hold | CENTRIFUGAL PUMPING SYSTEM & SPARE PARTS | "$13,707.00 " | Provide specific end-use and end-use location for each of these pumps including a description of the process or processes and equipment in which they will be used. | 30-Oct-00 | Italy | Sti Servizi Technici Industriali S.R.L. |
The United Kingdom; The United States | On Hold | PUMPS | "$766,683.00 " | "US: 1051 list items: Tab.l0 Page 12 Paragraph 10.4.2 corrosion resistant pumps (items #2, #6, #8, and #9); provide the material composition for ""acid-proof cast iron"" by percentage composition of each of its alloy components (items #5, #8 and #9); provi" | 04-Dec-00 | Belgium | Ensival Industrie S.A. |
The United States | On Hold | COMPRESSOR/ACCESSORIES | "$566,320.00 " | "US: Goods on 1051 list, Tab 10, Page 12, par. 10.4.2 corrosion resistant pump designed for 97-98% sulfuric acid (316 stainless steel and Hastalloy components); OIP please provide any tech info/assessments used to determine that the above goods are not sub" | 13-Dec-00 | Italy | Garo Dott. Ing. Roberto Gabbioneta Spa |
The United Kingdom; The United States | On Hold | SPRAYING MACHINE | "$868,639.39 " | "US: 1051 listed item, Tab 10, Page, 12 Paragraph 10.4.1.5 corrosion resistant tank (item #4. Annex 1), Tab 10, Page 12, Paragraph 10.4.2 corrosion resistant pump (item #3 Annex 1); Tab 10, Page 22, Paragraph 8.3 (Item #1); provide photographs and drawings" | 26-Dec-00 | Saudi Arabia | Technical Company For Spraying |
The United States | On Hold | MEDICAL EQUIPMENT PARTS | "$218,012.40 " | "US: itemize and give specifications for all components in the raw water pressure system (item #1); provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressu" | 17-Jun-98 | Italy | Culligan International (Uk) Ltd |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$9,639,177.87 " | "Need tech specs for all pumps including rotation speed, drawing, type, material composition of all components and linings, dimensions, flow rate, maximum pressure, and weight; provide specifications for all valves including dimensions, weight, type, mate" | 31-Jan-01 | Jordan | Rama Agricultural Equipment Mfg |
The United States | On Hold | TANKER | "$14,805,000.00 " | "Provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (part #5557Ya2-3407200-01 and the fuel transfer pumps associated wi" | 31-Jan-01 | Egypt | Leatsco/Uralaz Port Said |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$106,170.00 " | #6 on 1051 list | 20-Mar-00 | UAE | Zane General Trading Est. |
The United States | On Hold | PUMPS AND SPARE PARTS; PUMPS ACCESSORIES | "$145,444.00 " | "1051 list - tab 10, p12, para 10.4.2, request any tech info/assessment to determine goods are not SCR 1051" | 18-Apr-00 | France | Ksb Sa |
The United States | On Hold | MECHANICAL EQUIPMENT; ELECTRICAL EQUIPMENT | "$3,286,685.00 " | US: Goods on 1051 list as indicated by Sec't and for ANSI grade of stainless steel of pumps in annex 7.3 (in technical offer) & pending further technical review | 27-Apr-00 | Turkey | Rona Mallon Enternasyonal Muteahhitlik Ltd. Sti |
The United States | On Hold | MECHANICAL EQUIPMENT; ELECTRICAL EQUIPMENT | "$4,380,582.00 " | "item #8 chlorine detector & chlorine masks on 1051 list as indicated by Sec't. Need tech specs on item #30.1N (portable welder), item 30.1O (hydraulic press), items 4A/B, 10, 20.3 (water pumps), item 8A/B (sludge scrapers), item #16A/B (booster stations)" | 27-Apr-00 | Turkey | Rona Mallon Enternasyonal Muteahhitlik Ltd. Sti |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$62,731.43 " | goods on 1051 list | 30-May-00 | Spain | Lubna Trading S.A. |
The United States | On Hold | DRIP UNITS SETS | "$451,875.00 " | "Items #38, 39 appear to be on 1051 list. Request OIP to provide tech info/assessments used to determine that pumps are not subject to provision of SCR1051." | 06-Jun-00 | Jordan | Arab Drip Irrigation Systems Mfg Co. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$107,000.00 " | US: goods on 1051 list as indicated by Sec't | 12-Jun-00 | UAE | Gulf Falcon Technical Equipment Trading Llc |
The United States | On Hold | SEWAGE PUMPS AND SPARES | "$229,021.78 " | What is the material used for the pumps? | 07-Sep-99 | France | Pompes Salmson |
The United States | On Hold | MEDICAL SUPPLIES | "$310,002.03 " | US: for tech specs on vacuum pump | 31-Mar-99 | France | Otto Bock France S.A.R.L. |
The United Kingdom; The United States | On Hold | PUMPS | "$191,202.00 " | "US: 1051 listed items: Tab 10, Page 12, par 10.4.3 Corrosion resistant pumps (items #1 - #5); WMD dual-use related to Tab 10, Page 12, Paragraph 10.4.3 Corrosion resistant pumps (items #6 and #7); UK: Require presence of UNMOVIC in Iraq. Flourides are by" | 22-Jun-00 | UAE | Ch Warman Middle East Fze |
The United States | On Hold | FIRE FIGHTING VEHICLES | "$529,200.00 " | "tech specs and material composition on water/foam tank, water pump, self-filling system, prop hose and strainer" | 27-Jun-00 | China | Al Wasel And Babel General Trading Co. L.L.C. |
The United States | On Hold | PUMPS | "$13,248.90 " | Provide an explanation of the degree of corrosion resistance offered by PVC pump and valve components with sulfuric acid and sodium hydroxide; verify that these pumps and valves are not lined. | 11-Jul-00 | Switzerland | Envita Management + Development |
The United States | On Hold | TURBINE SYSTEM EQUIPMENT | "$5,901.67 " | for material composition of all pump parts | 18-Jul-00 | France | Cis-Paris |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$1,215,000.00 " | tech specs and material composition of pumps | 18-Jul-00 | Spain | Dominion Spain |
The United States | On Hold | PUMPS AND SPARE PARTS | "$595,339.47 " | "goods appear to be 1051 - tab 10, p34, 2.1.1, request info/assessments used to determine goods are not SCR 1051" | 18-Jul-00 | Jordan | Al-Defaf Establishment For Trade |
The United States | On Hold | FIRE FIGHTING VEHICLES | "$1,060,000.00 " | for deletion of Israeli clause & for tech specs & material composition of tanks & pumps | 18-Jul-00 | UAE | The Industrial Engineering And Metal |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$29,682.00 " | end use/user info | 26-Jul-00 | Russian Federation | Transumed Llc |
The United States | On Hold | PUMPS AND SPARE PARTS | "$293,980.50 " | tech specs | 27-Jul-00 | Syria | Asia Medical Center |
The United States | On Hold | PUMPS ACCESSORIES; PUMPS AND SPARE PARTS | "$680,000.00 " | for level of corrosion stainless steel used in pumps and for tech specs | 27-Jul-00 | Lebanon | Ebd Lebanon S.A.R.L. |
The United States | On Hold | FIRE FIGHTING PUMPS & SPARES; ACCESSORIES | "$750,000.00 " | "US:Hold for technical specifications on nozzles, special tools and testing equipment; " | 28-Jul-00 | Egypt | Al-Mohandes International Co. (Ami) |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$23,100.00 " | US: item#1 is WMD dual use | 02-Aug-00 | Italy | General Packing S.R.L. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$46,080.00 " | for tech specs on the pumps | 07-Aug-00 | Russian Federation | Interenergoservis |
The United States | On Hold | PUMPS AND SPARE PARTS | "$427,113.40 " | for tech specs on the ventilators. is the ventilator fixed or mobile? can oxygen sensor be used to detect any other elements or compounds? | 07-Aug-00 | Lebanon | Caretek S.A.L. |
The United States | On Hold | DRIP UNITS SETS | "$385,000.00 " | for tech specs/material composition of pumps | 10-Aug-00 | India | "Jain Irrigation Systems Limited," |
The United States | On Hold | PUMPS; SPARE PARTS; ACCESSORIES | "$261,986.00 " | for material composition on item #1 (pumps) | 16-Aug-00 | Italy | Varisco Pompe S.R.L. |
The United States | On Hold | TRAILER | "$4,071,312.00 " | "for tech specs, material composition, flow rate, & inlet/outlet pressure of pumps" | 16-Aug-00 | UAE | Gulf Falcon Technical Equipment Trading Llc |
The United States | On Hold | PUMPS; MOTOR | "$6,000,000.00 " | "for tech specs, material composition & flow rate of pumps" | 16-Aug-00 | China | Ksb Shanghai Pump. Co. |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$2,245,000.00 " | for material composition of pumps | 18-Aug-00 | Italy | Teksud Spa |
The United States | On Hold | EXCAVATION EQUIPMENT/PARTS | "$2,149,821.34 " | "provide a legible copy of the data sheets for the pump and valves; provide the previously requested specifications for the air compressors including material composition, flow rate, and pressure rating (#500310905 and #93161788); provide previously req" | 23-Aug-00 | Syria | Altoun Trading Co. |
The United States | On Hold | FLUSHING MACHINE | "$1,250,000.00 " | for material composition of pumps | 23-Aug-00 | China | Hangzhou Metals Minerals Machinery |
The United States | On Hold | FLUSHING MACHINE; SPARE PARTS | "$600,000.00 " | for material composition of pumps | 23-Aug-00 | China | Hangzhou Metals Minerals Machinery |
The United States | On Hold | WATER TANKER W/ SPARE PARTS | "$5,500,000.00 " | for material composition of pumps | 23-Aug-00 | VietNam | Vietnam Shipbuilding Industry |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$2,290,000.00 " | for material composition of pumps | 23-Aug-00 | Italy | Semitalia S.N.C. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$343,099.66 " | for material composition of pumps | 23-Aug-00 | France | Cis-Paris |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$50,705.00 " | for material composition of pumps | 23-Aug-00 | France | Ksb Sa |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$1,296,000.00 " | "2000L reservoir fiber glass on 1051 list at tab 10, pg 12, para 10.4.1.5. Tech specs, material composition & inner diameter of all valves & material composition of all parts of dosing pumps that comes in contact with liquid" | 30-Aug-00 | France | Irrifrance Industrie |
The United States | On Hold | "PUMPS, MOTORS AND ROTARY MACHINES" | "$36,160.00 " | for pump weight & drawings | 08-Sep-00 | India | Wpil Limited |
The United States | On Hold | BOILER TYPE FIRE TUBE W/ SPARE PARTS | "$577,300.00 " | "need specs for all pumps, including dimensions, weight, type, material composition of components, flow rate, outlet pressure, rotation speed & drawings (items 1, 2, 3); need specs for all valves, including dimensions, weight, type, material composition of" | 13-Sep-00 | China | China National Chemical Construction |
The United States | On Hold | FLOUR MILLS; SPARE PARTS | "$34,400,000.00 " | "US: Need tech specs for air compressor dryers, all pumps, pipes, air locks, grinding & corrugating machine & all valves including material composition for pumps & pipes; purpose & use of air locks, grinding & corrugating machine; components for water prep" | 15-Sep-00 | Switzerland | Buhler Ag |
The United States | On Hold | STEAM TURBINE SPARE PARTS | "$23,127.00 " | for material composition of pumps | 27-Sep-00 | Japan | Sigma Corporation |
The United States | On Hold | TURBINE & COMPRESSOR BLADES/ACC | "$427,980.00 " | "for meterial composition on item #1 (pump), #4 (pump) & #5 (valve). For item #6 (nozzle), need material composition & minimum spray particle size" | 02-Oct-00 | Italy | Fiat Avio S.P.A. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$1,537.02 " | "for tech specs on items #1, 2, 3, 4, 8, 19" | 02-Oct-00 | Italy | Termomeccanica S.P.A |
The United States | On Hold | SPARE PARTS FOR PUMP SETS | "$588,772.00 " | for detailed end use/user info | 02-Oct-00 | Japan | Sigma Corporation |
The United States | On Hold | EXCAVATORS & SPARE PARTS | "$2,208,000.00 " | "Provide previously requested material composition of all pump components and pump linings (items #24, #28 and #178 in application, #23, #27 and #178 on the contract) ; provide previously requested information on nozzles including material composition, fl" | 06-Oct-00 | France | Liebherr France S.A. |
The United States | On Hold | WATER TREATMENT COMPACT UNIT | "$12,570,000.00 " | "US: Gas masks on 1051 list as indicated by Sec't, chlorinator booster pump appears to be on 1051 list at tab 10, pg 12, para 10.4.2. & chlorine detector also appears to be on 1051 list at tab 10, pg 13, para 10.4.3. For material composition of stainless " | 06-Oct-00 | Austria | Erwin Burbach Gmbh |
The United States | On Hold | FIRE FIGHTING VEHICLES WITH SPARES | "$825,000.00 " | for grade of stainless steel for water tanks & all pumps | 06-Oct-00 | Turkey | Zimag Arac Ve Makina San Ve Tic As |
The United States | On Hold | CENTRIFUGAL WATER PUMPS | "$357,613.20 " | for detailed end use/user | 11-Oct-00 | UAE | Al-Huda Spare Parts Co. |
The United States | On Hold | GAS TURBINE | "$80,034,511.00 " | "specs for all pumps, valves, tanks (either as ASTM or DIN std or by alloy components comp), filters, pipes; itemize contents of all kites; provide descriptions of the function and operation of the following including any relevant specs foam generator (ite" | 17-Oct-00 | Russian Federation | "Jsc ""Technostroyexport""" |
The United States | On Hold | WATER PUMP | "$26,606.86 " | "for tech specs on pumps to include flow rate, outlet pressure, size & weight" | 06-Nov-00 | Jordan | Al-Ghanem Trading Contracting Co. Ltd |
The United States | On Hold | PUMPS; CHEMICALS | "$33,558.00 " | "Company supplied technical information, however most of it is illegible because it's a bad fax copy; provide a clean copy of the specifications for the injection pumps Specifications should include dimensions, weight, type, material composition, flow rat" | 13-Nov-00 | UAE | Fosroc International Limited |
The United States | On Hold | REFRIGERATED TRUCKS | "$1,011,938.00 " | "US: WMD dual-use related to S/1995/208, Page 14, Paragraph 1.3 refrigerated trucks; provide specs for the hydraulic pump including a description of the purpose and use on the refrigerated truck and the manufacturer's data sheets (item #88); provide the sp" | 16-Nov-00 | France | Luxor Exports France |
The United Kingdom; The United States | On Hold | PUMPS | "$34,750.00 " | "US: WMD dual use item: S/1995/208, Page 12, Paragraph 10.4.1 and 10.4.2 corrosion resistant pump. In fact DIN 1.4539 (equivalent to ASTM 904L) is actually 19% - 23% Chromium, 23% -28% Nickel, etc. Since more than half of the material with this designation" | 16-Nov-00 | Belgium | Ensival Industrie S.A. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$34,545.00 " | "US: need details for impellers including size, weight, material composition & drawings; need specs on pump impeller will be used in, including size, weight, material composition, flow rate, outlet pressure, rotation speed & drawings" | 16-Nov-00 | Italy | Applitec Srl Pza Xxv Aprile 9 |
The United Kingdom; The United States | On Hold | "PUMPS,GEAR BOXES AND MOTORS" | "$148,074.80 " | "US: 1051 list item: Tab 10, Page 12, Paragraph 10.4.1.2, item #1 corrosion resistant vertical axial flow pump; UK: We cannot consider approving this contract until UNMOVIC is present in Iraq because the goods in question would provide Iraq with the abi" | 29-Nov-00 | Belgium | Ensival Industrie S.A. |
The United States | On Hold | AIR COMPRESSORS | "$22,555.14 " | "for material composition of all components for compressors & for clarification of quantity - request form & purchase order indicated 4 units, contract indicated 5 pumps (5-2)" | 04-Dec-00 | France | Dresser International Group |
The United States | On Hold | WASTE WATER TREATMENT PLANT | "$2,448,169.71 " | "Item #4 is CW dual use and please supply dimensions, weight, type, material composition of all components and linings, flow rate,, inlet/outlet pressure, rotation speed and drawings for all pumps (items #2, #4, #15, #6 ,#9, #16, #17, and #18); provide mat" | 13-Dec-00 | UAE | Metito Emirates L.L.C. |
The United States | On Hold | STEAM GENERATION & UTILIZATION PLANT | "$2,689,500.00 " | "US -#10 steam nozzle training-CW/BW applications; need description & material composition of water softener resin, polyphosphoic dispenser, water, fuel & steam filters, water supply pump; need description of purpose and use, manufacturers data sheets and " | 13-Dec-00 | Italy | Didacta Italia S.R.L. |
The United States | On Hold | MECHANICAL SEALS FOR PUMPS | "$19,052.27 " | "US: provide the material composition for the seals (item #1b); provide the specs for the submersible pumps for which these seals are destined including a description of the purpose and use, dimensions,weight, type, material composition of all components, " | 26-Dec-00 | Sweden | Itt Flygt Ab/Flygt International |
The United States | On Hold | PUMPS AND SPARE PARTS; ACCESSORIES | "$95,225.00 " | Pending further technical review | 10-Jan-01 | Egypt | Allweiler Farid Pumps Co. |
The United Kingdom; The United States | On Hold | SPRAYERS; SPARE PARTS | "$503,999.75 " | "US: Goods are on the 1051 list as indicated by the Secretariat and 1051 list items: Tab 10, Page 12, Paragraph 10.4.2 corrosion resistant pump (annex 1 to contract); Tab 10, Page 22, Paragraph 8.3 chassis mounted sprayers (Annex 1 to contract); Tab 10, Pa" | 16-Jan-01 | Tunisia | Societe Sepim |
The United States | On Hold | FORKLIFT/SPARES | "$167,325.00 " | "Provide specifications for the Nitrogen Filling Device including a description of the purpose and use on the forklift (item # 136) ; provide specifications for all pumps including dimensions, weight, type, material composition for all components and lini" | 23-Jan-01 | Belarus | Belmetalenergo Inc. |
The United States | On Hold | CHILLERS WITH RECOMMENDED SPARE PARTS | "$253,859.68 " | "US: provide the material composition of the chiller condenser and evaporator (item #1); provide the material composition for all components and linings/ flow rate maximum pressure, size, weight and drawings for the oil pump (item # 18) ; provide the dim" | 19-Jan-01 | Belgium | Sa De Vente Des Equipments Trane |
The United States | On Hold | EXCAVATORS & SPARE PARTS | "$6,862,500.00 " | "Itemize the contents of the following kits and sets: engine overhaul (item #22), metal (item #34, #35, #36, #37, #38, and #39), water pump (item #53), turbocharger (item #60), cylinder boom (item #529 and #530), cylinder arm (item #531 and #532), cylinder" | 07-Feb-01 | China | Hangzhou Metals Minerals Machinery |
The United States | On Hold | STEAM TURBINES | "$679,475.18 " | "Provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (items #3 and #4); provide specific end-use locations including spe" | 07-Feb-01 | France | Dresser International Group |
The United States | On Hold | TURBINE PUMP | "$2,333,000.00 " | "Provide the material composition of the coating or liner material for the steel flanged pipes; provide the dimensions, weight and drawings for the pumps " | 14-Feb-01 | Italy | Caprari Spa |
The United States | On Hold | DIESEL DRIVEN PUMPS; ACCESSORIES; SPARE PARTS | "$8,057,280.00 " | "specs for pumps including dimensions, weight, drawing and material composition of all components that come in contact w/ fluid being pumped" | 26-Sep-00 | Jordan | Arab Pump Manufacturing Co Ltd |
The United States | On Hold | VERTICAL TURBINE PUMPS/SPARES | "$2,726,900.00 " | for material composition of pumps | 27-Sep-00 | Lebanon | Desteco Company |
The United States | On Hold | COMPRESSOR | "$1,385,699.00 " | "For material construction & flow rate of vacuum pump & what compound can refrigerant leak detector detect? Tech specs on high vacuum pump, pressurizing system, motor testing instrument & the refrigerant leak detector" | 06-Oct-00 | India | Pcp International Limited |
The United Kingdom; The United States | On Hold | REHABILITATION FOR THE EXTRUSION LINE FOR ALUMINUM PROFILE | "$7,500,000.00 " | "US: Goods are on the 1051 list as indicated by the Secretariat and 1051 items: Tab 9, Page 3, Paragraph 3 forging aluminum into solid bars (whole contract); Tab 10, Page 12, Paragraph 10.4.2 Acid water exchanger (items #197). acid pump (65 cubic meters pe" | 19-Oct-00 | France | Mecanix Division Of Nutris Co. Sa |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$12,862,500.00 " | "1051 item: Tab 10, Page 12, Paragraph 10.4.1.5 5000- liter fiberglass tank; provide specifications for the spray nozzle including droplet size range in micrometers; provide the specifications for all pumps including dimensions, weight, type, material comp" | 19-Oct-00 | Saudi Arabia | Hamad M Saedan & Sons |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$8,029,229.41 " | provide previously requested info on weight & material composition for all components & linings for pumps (item 7); info provided removes concern over sprinklers (items 3 & 8) | 26-Oct-00 | UAE | Trans World Agricultural Development And Environment |
The United States | On Hold | WATER WELL REHABILITATION UNITS/PARTS | "$2,854,500.00 " | "Pumps on 1051 list at tab 10, pg 12, para 10.4.2. Also for tech specs on nozzles & nozzle tips, what is the material for pump casing, header tank & high pressure rotary head" | 27-Oct-00 | France | "Sofrag, Alia Development France " |
The United States | On Hold | SUBSTATION | "$6,496,138.18 " | "US: provide specs for the SFG filling equipment (item #61); provide material composition and suction rate (in cubic meters) for the Vacuum pump (item #62); provide specs, an itemized list of components, and a description of the equipment and SF6 drying pr" | 31-Oct-00 | Turkey | Simko Ticaret Ve Sanayi |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$2,088,924.05 " | "Goods are on the 1051 list as indicated by the Secretariat and please provide the previously requested information on the water pump including size, weight, material composition, flow rate, outlet pressure, rotation speed " | 15-Nov-00 | Egypt | A.H. Modern Industrial And Export |
The United States | On Hold | WATER PUMP | "$2,116,219.41 " | "Provide specs for the pump including dimensions; weight, material composition for all components, and drawings; No end-use or end-user specified. " | 15-Nov-00 | Egypt | Helwan Diesel Engines Co. |
The United States | On Hold | WATER TANKER/SPARE PARTS | "$59,220,000.00 " | "WMD dual use, tab 10, p11, para 10.3 stainless steel tanks on all terrain vehicles; 212, 342, 363 - specs for pumps, including size, weight, material composition, flow rate, outlet pressure, rotation speed and drawings, 217, 218, 228 - size, weight, mater" | 17-Nov-00 | Egypt | Leatsco/Uralaz Port Said |
The United States | On Hold | TIPPING TRUCK W/ SPARE PARTS | "$13,868,858.00 " | "need manufacturer's specs for trucks including axle loading, dimensions, hydraulic systems & stabilization or leveling systems; specs for 9 piston pumps including description of purpose, material composition of all components, output pressures, rotation s" | 17-Nov-00 | Egypt | Ghabbour Group Interland Motors |
The United States | On Hold | AIRCRAFT WATER SERVICE TRUCK W/SPARES | "$471,729.96 " | "specs for fuel injection (item 10) and water supply (28) pumps including dimensions, weight, type, material composition, flow rate, inlet/outlet pressure, rotation speed and drawings, material composition as ASTM or DIN std alloy or by percentage composit" | 21-Nov-00 | China | Xuan Yuan Industrial Development Co. Ltd |
The United States | On Hold | TIPPER TRUCK | "$8,733,514.42 " | complete tech specs and drawings for tipper trucks; specs and material composition of injection pump item 181; performance specs on refrigerant compressor item 224; materials and construction specs on fuel tank item 237; specs on stalk switch item 298; it | 21-Nov-00 | Morocco | "Sefamar, Usine D'assemblage Camion-Bus" |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$7,052,461.77 " | "US- WMD dual use (Tab 10, Page 12, Paragraph 10.4.2 and 10.4.4 corrosion resistant pumps and valves)sap" | 24-Nov-00 | France | Otech |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$2,627,401.17 " | "US: provide the material composition for the 500-liter fertilizer tank (item #2); provide the specs for all pumps including dimensions, weight, type, material composition of all components, flow rate, inlet/outlet pressure, rotation speed and drawings (it" | 27-Nov-00 | Tunisia | Etablissements M Loukil Et Cie |
The United States | On Hold | LEVELING TAMPING AND LINING MACHINES | "$6,000,000.00 " | "US: provide specs for pumps incl dim, wt, type, material comp, flow rate, outlet pressure & drawings (item #84-88, 99); also provide specs for valves incl dim, wt, type, material composition, flow rate, max press, actuator response time & drawings (item #" | 27-Nov-00 | Russian Federation | Energomachexport |
The United States | On Hold | CHLORINE BOOSTING PUMPS; SPARE PARTS | "$1,223,516.96 " | "US: provide specs for all valves incl dims, wt, type, material composition, flow rate, rotation speed & drawings (items #1-20)" | 28-Nov-00 | France | Salmson |
The United States | On Hold | WATER PUMP | "$2,360,776.37 " | "need specs for water pumps including dimensions, weight, type, material composition, flow rate, maximum rotation speed & drawings (item #1) also description & use for item #68 (blaster)" | 28-Nov-00 | Tunisia | Societe Sakmo |
The United States | On Hold | "PUMPS, MOTORS AND ROTARY MACHINES" | "$633,227.85 " | "US: description of function and operation as well as material composition expressed as an ASTM or DIN std alloy or by percentage of each alloy component for items 1-6, specs for gear pump including dimensions, weight, material composition of all component" | 30-Nov-00 | Cyprus | Techpower Corporation |
The United States | On Hold | CENTER PIVOT IRRIGATION SYSTEM | "$4,762,475.91 " | "1051 list item: Tab 10, Page 12, Paragraph 10.4.1.5 5000-liter fiberglass tank; provide the maximum pressure, rotation speed, size, and weight of the injection pump; provide the material composition, rotation speed, size, and weight of the irrigation pum" | 30-Nov-00 | Tunisia | Etablissements M Loukil Et Cie |
The United States | On Hold | WATER PUMPS DRIVEN BY DIESEL ENGINES | "$4,416,629.44 " | "need specs for pumps including dimensions, weight, type, material composition of all components in contact with fluid & drawings" | 30-Nov-00 | Lebanon | Ghaddar Machinery Est. |
The United States | On Hold | SPRINKLER IRRIGATION SYSTEM | "$4,600,121.10 " | "for material composition for all components of all piping, valves & pumps; need dimensions, weight, type, flow rate, inlet/outlet pressure, rotation speed & drawings for all pumps; tech specs for all nozzles including flow rate/inlet pressure profiles, ma" | 01-Dec-00 | France | Irrifrance Industrie |
The United States | On Hold | AIR COOLED CHILLER/PARTS | "$136,686.92 " | "need specs for pumps associated with chillers including dimensions, weight, type, material composition of all components, flow rate, inlet/outlet pressures; rotation speed & drawings" | 01-Dec-00 | India | Colrige International (Division Of |
The United States | On Hold | SPRINKLER IRRIGATION SYSTEM | "$6,459,104.46 " | "need specs for pumps including dimensions, weight, material composition for all components & drawings (items 14 & 29); need specs for sprinklers including material composition, flow rate, dimensions, drawings & photo (items 12 & 26)" | 04-Dec-00 | Greece | Exel Mak -Metal S.A. |
The United States | On Hold | TRUCK TRACTOR-SEMI-TRAILER/SPARES | "$1,194,898.86 " | "specs for semi-trailer tipper incl. dimensions, drawings, details and specs for any stabilization or leveling systems; specs for fuel pump incl. dimensions, weight, type, material composition, flow rate, inlet/outlet pressure, rotation, speed and drawings" | 04-Dec-00 | Belarus | Belmetalenergo Inc. |
The United States | On Hold | WHEEL LOADER/PARTS | "$2,858,763.93 " | "specs for filters (2-4), pumps (11, 59, 121, 128), valves (21, 22, 74-77); description of operation and use, material comp and specs for ""servostat"" (165) and ""control unit"" (173); itemize contents of ""special tools"", test equipment"" and ""standard tool ki" | 04-Dec-00 | Switzerland | Liebherr-Export Ag |
The United States | On Hold | TIP TRUCKS; SPARE PARTS | "$9,254,043.77 " | "US: specs for pumps including dimensions, weight, type, material composition for all components, flow rate, inlet/outlet pressure, rotation speed and drawings (items 26, 32, 35, 37, 62); specs and material composition of all components for compressor (130" | 06-Dec-00 | UAE | Al Wasel & Babel General Trading |
The United States | On Hold | WATER PUMPS | "$2,483,291.01 " | "dimensions, weight and material composition of all components and drawings, material comp as either ASTM or DIN std alloy or by percentage comp for each alloy component" | 08-Dec-00 | Lebanon | Ghaddar Machinery Est. |
The United States | On Hold | GENERATING SET | "$1,136,348.24 " | "operating specs and material comp for oil pump (43), starter (41), fuel element nozzle (79), oil pump (80), starter (88), charging alternator (89); itemize fuel element set (32); itemize special tools and test equipment; specify items expert will bring to" | 11-Dec-00 | Lebanon | Sakr Power Systems Sal |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$732,159.85 " | "For purpose and use for an itemized list of special instrumentation; for drawing, dimensions and material composition for oil coolers. " | 13-Dec-00 | Cyprus | Voith Middle East Ltd. |
The United States | On Hold | SEWAGE COMPACT W/SPARES | "$27,591,774.07 " | "1051 item: Tab 10, Page 12, Paragraph 10.4.1.5 glass-lined tanks (item #4); provide previously requested specifications for all pumps including dimensions, weight, type, material compositions of all components and linings, flow rate, inlet/outlet pressure" | 13-Dec-00 | Greece | Envitec S.A |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$605,110.28 " | "provide tech specs for pump for which components are being ordered including dimensions, weight, type, material composition of all components, flow rate, inlet/outlet pressure, rotation speed & drawings; provide all requested specs as either equivalent AS" | 13-Dec-00 | UAE | Black Sea Energy |
The United States | On Hold | WATER PUMPS | "$17,717,085.71 " | "For itemization of tools in kits; for weight, material composition of all components and drawings for all pumps." | 14-Dec-00 | India | Kirloskar Oil Engines Limited |
The United States | On Hold | CENTER PIVOT | "$6,900,300.15 " | "US: goods on 1051 list as indicated by the Secretariat and Please provide the specs for all pumps including dimensions, weight, type, material composition of all components, flow rate, inlet/outlet pressure, rotation speed and drawings; provide specs for " | 18-Dec-00 | UAE | Al Wasel And Babel General Trading Co. L.L.C. |
The United States | On Hold | CENTRIFUGAL PUMPING SYSTEM & SPARE PARTS | "$966,016.78 " | "US: provide material composition of all pump components (items #1 - #4); provide specs for the hydrocyclone including material composition of all components, a description of the purpose and use, manufacturer's data sheets, and a photograph (item #6); pro" | 20-Dec-00 | Russian Federation | "Jsc ""Intermach & Co.""" |
The United Kingdom; The United States | On Hold | CHILLERS WITH RECOMMENDED SPARE PARTS | "$8,551,020.52 " | "US: provide specs for all pumps including dimensions, weight, type, material composition for all components and linings and drawings (item #3); provide specs for the compressor module including a description and manufacturers data sheets (item #12); pro" | 20-Nov-00 | Austria | Evapco |
The United States | On Hold | ELECTRO MECHANICAL EQUIPMENT | "$1,093,036.93 " | "US: provide the weight of all pumps (items #2, #15, and #21 - #24); provide the material composition of all components and drawings for the chlorinators (items #4, #11, and #26); provide specs for the air compressor including construction type, material c" | 21-Dec-00 | Italy | Sitel S.R.L. |
The United States | On Hold | GRAIN PUMPS W/ACCESSORIES | "$2,644,318.18 " | "US: provide material composition for flex hoses (item #6), rigid pipes (items #7, #9, and #10), and flex tubes (items #12, #13, and #14); provide the material composition of stainless lined galvanized steel tubes (items #11) and the rotary valve housing a" | 21-Dec-00 | Switzerland | Buhler Ag |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$1,724,727.10 " | "US: provide specific information or references to the pumps that have been ordered; provide pump model, material composition of all components (especially those in contact with fluid), weight of pump, and pump dimensions (item #7 and #8); provide material" | 21-Dec-00 | UAE | Trans World Agricultural Development And Environment |
The United States | On Hold | WATER TANKS; SPARE PARTS | "$1,715,837.73 " | "US: Please verify flow rate of pump (listed as both 60 cubic meters per hour and 60 cubic meters per minute -- is one correct?); provide specifications for the low pressure pump for the water tanker including dimensions, weight, type, material composition" | 26-Dec-00 | Lebanon | Orient Marketing & Trading |
The United States | On Hold | SPARE PARTS FOR WATER TREATMENT PLANTS; GEAR BOX | "$1,576,543.55 " | "US: 1051 item: Tab 10, Page 12, Paragraph 10.4.3 rubber pipe (items #18 and #19); provide a clarification of the items substituted on the Comm - are these pumps with motor or gearboxes with motors? (items #23 - #26); provide specifications for the grease " | 26-Dec-00 | Jordan | Carmel Air Conditioning And Refrigeration |
The United States | On Hold | PUMPS | "$47,392.96 " | US: provide the specific end-use locations for these pumps; provide drawings and dimensions for all pumps (items #1 - #4). | 26-Dec-00 | Turkey | "Aybakar Machinery Industry Co., Inc" |
The United States | On Hold | TRANSFORMERS | "$23,478,679.49 " | "US: provide the quantity of silica gel being ordered (items #106 - #109); provide the specs for the vacuum pumps including material composition for all components (item #70); provide specs for all pumps including dimensions, weight, type, material composi" | 26-Dec-00 | Italy | Ingra Italia Srl |
The United States | On Hold | FIRE FIGHTING VEHICLES | "$6,535,646.76 " | "US: need complete specs for fire fighting vehicles, all pumps & valves, air dehydrator; material composition for water & foam tank & any linings; material composition & dimensions for all hoses; itemized list of components & equip included in repair kits;" | 29-Dec-00 | Egypt | Mcv Free Zone |
The United States | On Hold | TURBINE AN COMPRESSOR W/ACCESSORIES | "$1,860,325.00 " | "US: need material composition for all bearings & seals (items 1-9), all compressor stator & rotor blades (item 12); need specs for oil pump including material composition, flow rate, maximum pressure & rotation speed (item 21). " | 02-Jan-01 | Egypt | Eme |
The United States | On Hold | SUBMERSIBLE PUMPS | "$5,267,777.05 " | " US: provide the dimensions, weight and material composition of all components for all pumps; provide material compositions as either an ASTM or DIN standard alloy or by percentage composition for each alloy component; provide specific end-use locations f" | 03-Jan-01 | Turkey | Standart Dis Tic. Ve Paz. A.S. |
The United States | On Hold | BOATS; SPARE PARTS | "$1,029,078.81 " | US: Goods are on the 1051 list as indicated by the Secretariat and provide a photograph and specifications for the SCUBA masks and regulators including whether masks and regulator are integrated and face mask design; provide specs for all pumps including | 03-Jan-01 | Turkey | Pts Giyim Sanayi Ve Ticaret A.S. |
The United States | On Hold | CENTRIFUGAL PUMPING SYSTEM & SPARE PARTS | "$3,063,292.68 " | "US: provide specs for the pumps including dimensions, weight, material composition for all components and linings, and drawings (items #1 and #59)." | 04-Jan-01 | China | China National Automotive Industry |
The United States | On Hold | PUMPS; ACCESSORIES; SPARE PARTS | "$1,105,589.63 " | "US: provide dimensions, weight, material composition for all components, rotation speed and drawings for all pumps (item #1 - #11)." | 04-Jan-01 | China | China National Automotive Industry |
The United States | On Hold | PUMPS AND SPARE PARTS | "$2,756,718.41 " | US: provide the weight of the pumps itself and the complete model number such that material composition can be determined; with this information this could likely be approved very quickly. | 09-Jan-01 | Egypt | Allweiler Farid Pumps Co. |
The United Kingdom; The United States | On Hold | WATER PUMPS | "$334,558.48 " | US: provide the specific end-use of the pumps including specific production processes and machines or processing equipment for which the pumps are destined; confirm the pumps are not lined; provide a legible copy of the technical data sheets with dimensio | 08-Jan-01 | Belgium | Ensival Industrie S.A. |
The United States | On Hold | FUEL TANKER/PARTS | "$330,000.00 " | "Provide specs for pumps including dimensions, weight, material composition for all components, inlet/outlet pressure and drawings (items #110 and #111); provide specs for the sprayer including flow rate, material composition for all components, volume, in" | 09-Jan-01 | Belarus | Belmetalenergo Inc. |
The United States | On Hold | "PUMPS,COMPRESSORS,ROTARY MACHINES AND SPARES" | "$142,752.40 " | "US: provide specific details on the end-use for this equipment; provide specs for the gear boxes including company of manufacture, manufacturer's data sheets, photographs, drawings, dimensions, weight, rotation speeds and gear ratios." | 09-Jan-01 | Spain | Mena Tracon Spain S.L |
The United States | On Hold | TURBINE SYSTEM EQUIPMENT & INSTRUMENTS | "$309,239.60 " | "US: provide the material composition for all components and lining for pump (item #6); provide the dimensions, weight, drawings, material composition for all components and linings, maximum pressure, minimum inside diameter, flow rate, and actuator respo" | 09-Jan-01 | Spain | Mena Tracon Spain S.L |
The United States | On Hold | SPRINKLER IRRIGATION UNITS | "$12,089,885.55 " | "US: provide specs for all pumps including dimensions, weight, material composition for all components and linings and drawings; provide specs for all sprinklers including material composition of all joints, fittings, couplings and sprinklers and a diagram" | 10-Jan-01 | Egypt | Helwan Diesel Engines Co. |
The United States | On Hold | FIRE FIGHTING EQUIPMENT; SPARE PARTS | "$212,204.34 " | "US: provide the material composition for the tanks (items #4 - #7, and #11), sprinkler heads and nozzles (items #13 and #19), foam (item #17); verify that item #22 listed as an 02 charging pump is a typographical error; provide manufacturer's data sheets " | 12-Jan-01 | UAE | National Fire Fighting Mfg. Co. Ltd. |
The United States | On Hold | COLD MILLING MACHINE | "$2,298,779.19 " | "need itemized list of contents for instrument cases (items 55, 177) & repair kit (#109); material composition, dimensions, weight, flow rate, drawings & inlet/outlet pressure on pumps (#117-119, 228, 234-236); dimensions, weight, material composition, min" | 15-Jan-01 | Germany | Wirtgen Gmgh |
The United States | On Hold | AMBULANCE; SPARE PARTS | "$16,669,358.71 " | "US: Please provide specifications for the vacuum pump including material composition of all components and linings, flow rate, and maximum vacuum (subheading suction system, item vacuum pump); Please provide specifications for wireless communications dev" | 15-Jan-01 | Sweden | Middle East - Skan Consulting And Trading |
The United States | On Hold | TRUCK TANKERS/PARTS | "$10,466,223.13 " | "US: provide material composition for the tank, piping, and any lining (item #1); provide specs for all pumps including dimensions, weight, type, material composition for all components and lining, inlet/outlet pressure, rotation speed and drawings (item #" | 16-Jan-01 | UAE | Al Wasel & Babel General Trading |
The United States | On Hold | WATER SOFTENER W/ SPARE PARTS | "$1,707,295.79 " | "US: provide material composition for all components and linings for the systems including piping, valves, control valves, regulators, fittings and pumps." | 17-Jan-01 | Austria | Bwt Aktiengesells Chaft |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$82,257.76 " | need stainles steel specs as either ASTM or DIN standard alloy or by percentage composition for ea alloy component for vertical sump pump body (item 6); material composition of all components & linings for vertical sump pump (item 7) & vertical centrifuga | 18-Jan-01 | Italy | Costruzioni Meccaniche Luigi Biraghi E Figli Srl |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$15,703.92 " | "tech specs for pressure transducers; dimensions, weight, type, material composition of all parts & lining, flow rate, max pressure, minimum inside dia, actuator response time & drawings for solenoid valves (#8, 14); material composition for temperature se" | 19-Jan-01 | Belgium | Atlas Copco Airpower |
The United States | On Hold | HARVESTOR COMBINES | "$957,611.43 " | "US: provide the dimensions, weight, type, material composition for all components, flow rate, inlet/outlet pressure, rotation speed and drawings for all pumps (items #46, #47, and #82); provide material composition, droplet size and delivery rate for all " | 19-Jan-01 | France | Agco S.A. |
The United States | On Hold | SPARE PARTS | "$376,021.22 " | "US: provide all technical information on hydrostatic pump #43661980 (item #1, Hamm roller parts list), adjusting pump #11126604 (item #2, Hamm roller parts list), and hydrostatic pump #11140615 (item #4, Hamm roller parts list) to include, dimensions, wei" | 24-Jan-01 | France | Hamm France |
The United States | On Hold | EQUIPMENT | "$109,990,156.00 " | "US: provide material composition and capacity for fuel oil tank (item #18); provide material composition for fireproof material (item #30); provide technical specifications for pumps and condenser (item #42) to include dimensions, weight, type, material c" | 13-Sep-00 | China | Cmec Int'l. Engineering Co. Ltd. |
The United States | On Hold | GARBAGE TRUCKS/SPARE PARTS | "$3,931,887.04 " | "provide specifications for all pumps including dimensions, weight, type, material composition of all components and linings, flow rate, inlet/outlet pressures, rotation speed and drawings (items #49, #153, and #224); supply material composition and operat" | 29-Jan-01 | Russian Federation | Jsc Mtsensk Engineering Plant |
The United States | On Hold | WATER TANKER | "$1,952,440.00 " | "Provide the specifications for the pump including dimensions, weight, type, material composition for each component and drawings (item #29 in Annex 1 to the Contract); Contract indicates galvanized tank coating, but the coating listed contains no zinc-- " | 29-Jan-01 | UAE | Al-Hoda International Trading Company |
The United States | On Hold | SPARE PARTS | "$1,669,457.17 " | "Provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, and drawings (part of chiller system); provide specifications for all valves including dimensions, weight, type, material composi" | 31-Jan-01 | UAE | York Airconditioning & Refrigeration |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$222,667.19 " | "For tech specs to include dimensions, weight, material composition of all components and lining, flow rate, maximum pressure, minimum inside diameter, actuator response time and drawings for motive valves (item 3a) and suction valves (item 3b.)." | 31-Jan-01 | UAE | Technomaintaine |
The United Kingdom; The United States | On Hold | AIR CONDITIONERS/SPARE PARTS | "$941,864.89 " | "US: provide the temperature range and cubic meters the chillers will support (model FRTC2X14, FRTC22, FRTC18, and FRTC14); provide specifications for all oil pumps for all units including dimensions, weight, type, material composition for all components a" | 31-Jan-01 | Greece | Chr. And V. Fyrogeni12-16 I. Theologenis Street |
The United States | On Hold | TRUCKS/PARTS | "$8,883,000.00 " | "Provide the material composition of the tank and any lining; provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (pumps" | 31-Jan-01 | Egypt | Leatsco/Uralaz Port Said |
The United Kingdom; The United States | On Hold | COMPRESSOR/ACCESSORIES | "$291,325.37 " | "US: WMD dual use related to: S/1995/215, Page 31, Paragraph 34.4: ammonia compressors and pumps; UK: For detailed end use and end user information for all goods and a full technical description of the use of Ammonia for dairy products." | 05-Feb-01 | Denmark | York Refrigeration Global Contrcating |
The United States | On Hold | TRUCK TRACTOR W/SEMI-TRAILER | "$4,951,296.65 " | "Provide specifications for the tipper semi-trailer including drawings with dimensions, lifting force for the hydraulic cylinder and specifications for any stabilization or leveling system; provide specifications for high pressure fuel pump assembly, air c" | 06-Feb-01 | Russian Federation | Jsc Hydromashservice |
The United States | On Hold | FLUIDS LABORATORIES | "$6,104,442.10 " | "US: provide specifications for all pumps, valves, tanks, and nozzles associated with items #1 - #3, #5 -#15 and #18 - #29; provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow r" | 07-Feb-01 | Spain | Edibon S.A. |
The United States | On Hold | FORKLIFTS | "$529,912.97 " | "Please identify function of gas tension and insulating pool to include components and operating specifications (item #1, #34); Please provide specifications for hydraulic pump including dimensions, weight, type, material composition for all components an" | 08-Feb-01 | Turkey | Un-Ka Ticaret Ve Ambalaj San |
The United States | On Hold | WATER TANKER W/ SPARE PARTS | "$8,337,198.90 " | "Please provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (items listed under tank body and accessories)." | 08-Feb-01 | UAE | Al-Kasid Specialized Vehicles Trading |
The United States | On Hold | SLIPFORM JACKS AND SPARE PARTS | "$7,401,700.37 " | "Annex 1 of the contract: Pos. A: Please identify the special tools and hand tools (items #8, #9); Annex 1 of the contract: Pos. B: Please identify the special tools and Mark tool (items #9, #13); Please provide specifications for piston pump and small pum" | 08-Feb-01 | UAE | Al Wasel & Babel General Trading Co. |
The United States | On Hold | "PUMPS,COMPRESSORS AND ROTARY MACHINES" | "$192,215.99 " | "Provide the material composition for all spare parts for the compressor; provide the specifications for the compressor for which these spare parts are destined including dimensions, weight, type, material composition of all components and linings, flow ra" | 09-Feb-01 | Spain | Dominion Spain |
The United States | On Hold | TRUCK MIXERS/SPARES | "$6,033,318.01 " | "Provide the material composition of the water tank on the truck and specifications for pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings for (items " | 09-Feb-01 | Italy | Cifa S.P.A. |
The United States | On Hold | WATER PUMP/PARTS | "$57,057.35 " | "Provide specifications for all pumps including dimensions, weight, type, material composition for linings (if any), and drawings (items #1 and #2)." | 09-Feb-01 | Turkey | Yasar Dis Ticaret A.S. |
The United Kingdom; The United States | On Hold | WRECK REMOVAL | "$17,950,459.13 " | "US: provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings for (items #29 - #31, #56 and #57). Provide specifications for " | 09-Feb-01 | Turkey | Tuzla Shipyard And Tourism Co. |
The United States | On Hold | SPARE PARTS | "$14,956,687.91 " | "Provide specifications for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (items #2, #117 - #140, and #143); provide specifications for all v" | 09-Feb-01 | Austria | Cc Med Consulting & Engineering Gmbh |
The United Kingdom; The United States | On Hold | CHEESE PROCESSING EQUIPMENT | "$1,410,845.59 " | "US: Goods are on the 1051 list as indicated by the Secretariat and 1051 item: tab 10, Page 15, Paragraph 1.3.11 jacketed vessels (item described as ""double jacket-water and steam8- and Pos. 4.3); provide specifications for all pumps including dimensions" | 14-Feb-01 | Italy | Corazza Spa |
The United Kingdom; The United States | On Hold | CHEESE PROCESSING EQUIPMENT | "$331,112.13 " | "US: Goods are on the 1051 list as indicated by the Secretariat and 1051 item: tab 10, Page 15, Paragraph 1.3.11 jacketed vessels (part number SK15.13212); provide specifications for all pumps including dimensions, weight, type, material composition for al" | 14-Feb-01 | Italy | Corazza Spa |
The United States | On Hold | MOBILE VEHICLES AND MOBILE WORKSHOP | "$239,388.79 " | "Please provide specifications for the pneumatically operated lubrication pump including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings; Please provide the specif" | 14-Feb-01 | UAE | The Industrial Engineering And Metal |
The United Kingdom; The United States | On Hold | SPARE PARTS FOR PUMPS | "$1,433,392.46 " | "US: 1051 list items: tab 10,Page 12, Paragraph. 10.4.2: Hastelloy pump parts (items #164, #165, #166, #168, #213, #214, #216, and #219) and please explain the following metal composition citations 20/25/4 FEP + 20/25/4 NZ 144 By providing the correspondin" | 15-Feb-01 | Belgium | Ensival Industrie S.A. |
The United States | On Hold | PUMPS AND SPARE PARTS | "$159,427.00 " | Purchase not directly related to repair of Iraqi oil infrastructure for the purpose of increasing exports. | 23-Sep-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | FIRE FIGHTING PUMPS & SPARES | "$192,008.00 " | Export facility not authorized under oil for food programme | 06-Oct-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | FIRE FIGHTING PUMPS & SPARES | "$79,937.00 " | Export facility not authorized under oil for food programme | 06-Oct-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | FIRE FIGHTING PUMPS & SPARES | "$320,448.00 " | Export facility not authorized under the oil-for-food program. | 06-Oct-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | FIRE FIGHTING PUMPS & SPARES | "$122,828.00 " | Export facility not authorized under iol-for-food programme | 06-Oct-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | PUMPS AND SPARE PARTS | "$366,084.00 " | Purchase is not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports. | 06-Oct-98 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | PUMPS AND SPARE PARTS | "$16,700.00 " | Purchase is not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports. | 29-Oct-98 | France | Ksb Sa |
The United States | On Hold | COUPLINGS & TRANSMISSION UNITS FOR PUMPS | "$322,229.57 " | Purchase not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports | 04-Nov-98 | France | Flexibox S.A. |
The United States | On Hold | COUPLINGS & TRANSMISSION UNITS FOR PUMPS | "$53,810.78 " | Purchase not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports | 04-Nov-98 | France | Flexibox S.A. |
The United Kingdom; The United States | On Hold | SPARE PARTS FOR TURBO PUMPS | "$37,020.48 " | US: for technical specs - dual use concerns; UK: technical specs of the pump requested | 09-Apr-99 | China | Shenzhen Hong Ji Enterprise Corp. Ltd. |
The United States | On Hold | FIELD INSTRUMENTS FOR WATER INJECTION SYSTEM | "$200,618.03 " | "Valves on 1051 list at tab 10, pg 12, para 10.4.4; tube assembly at tab 10, pg 12, para 10.4.3; tech specs/material composition on pumps, level electrode top, orifice assembly. What is electrolyte composition & quantity? Need legible list of spares" | 27-Jan-00 | France | Usf France |
The United States | On Hold | SPARES FOR WORTHINGTON PUMPS | "$386,913.00 " | US: Associated with unauthorized export of petroleum products | 05-Apr-99 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | PUMPS & TURBINES | "$1,327,112.24 " | Purchase not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports | 28-Apr-99 | Jordan | First Industrial Technologies Group |
The United States | On Hold | PUMP/PARTS | "$223,200.00 " | Vertical pumps contain liquid sulfur. Item is on 1051 list. | 28-Jun-99 | France | Ksb Sa |
The United States | On Hold | SEISMIC ENERGY SOURCE VIBRATORS | "$1,734,596.00 " | "goods are on 1051 list, technical specs are needed on the vibrator units, servo drives, pump spares and consumable chemical kit air dryer" | 10-Aug-99 | France | Sercel/France |
The United States | On Hold | CHEMICAL INJECTION PUMPS TYPE SIMPLEX | "$79,055.94 " | need material composition of pumps to include corrosion resistant components | 07-Sep-99 | The United Kingdom | Goodtech Vanpipe Limited |
The United States | On Hold | DEMINERALIZATION EQUIPMENT | "$8,400,000.00 " | US: technical specs on computers and transfer pumps | 10-Sep-99 | Italy | Ionics Italba S.P.A. |
The United States | On Hold | ELECTRICAL DRIVEN PUMP | "$588,000.00 " | pending further tech review; need tech specs/drawings for pumps including materialc omposition for all components; need all requested alloy compositions as either equivalent ASTM or DIN alloy standard or by percent composition of ea alloy component | 14-Sep-99 | Jordan | Bargains Pumps Ve Trieb |
The United States | On Hold | PUMPS AND SPARE PARTS | "$14,030.00 " | "For chemical composition of pumps, technical specifications and detailed end use/user information" | 05-Nov-99 | Jordan | International Industrial Development |
The United States | On Hold | "LINER HIGH DENSITY POLYETHYLENE,GEOTEXTILE,FILTER NET COMPLETE W/ TOOLS AND ACCESSORIES" | "$970,000.00 " | for material composition of pumps | 29-Sep-00 | Germany | Gse Lining Technology Gmbh |
The United States | On Hold | HYDROSTATIC TEST PUMP WITH ACCESSORIES | "$18,714.00 " | Need material composition of the pumps. Need technical specs on the pumps and tanks. | 07-Oct-99 | France | Trouvay & Cauvin |
The United States | On Hold | SPARE PARTS FOR GAS TREATMENT | "$190,000.00 " | "For technical specifications on items B-3 (TFC membranes), B-8 (Feed & brine manual pumps), B-14 (Cartridge filters). Dosing pumps, high-pressure pumps, pressure vessels are on the 1051 list." | 11-Nov-99 | Italy | Ionics Italba S.P.A. |
The United States | On Hold | ELECTRICAL SUBMERSIBLE PUMPS W/ ACCESSORIES | "$326,490.00 " | detailed end user | 24-Nov-99 | Russian Federation | "Jsc ""Atommashexport""" |
The United Kingdom; The United States | On Hold | "WELL COMPLETION EQUIPMENT (PACKERS, PLUGS & ACCESSORIES)" | "$9,275,010.00 " | "US: 1051 items: Tab 10, Page 12, Paragraph 10.4.2 acidizing pump unit (item #6); Tab 10, Page 12, Paragraph 10.4.1.5 Acid mixing pool (item #7); Tab 10, Page 22, Paragraph 8.3 item #8; Tab 10, Page 22, par 8.3 acidizing tank truck (item #9); Tab 10, Page " | 30-Nov-99 | China | Zhongyuan Petroleum Exploration |
The United States | On Hold | SPARES FOR FILLING PLANTS | "$416,814.00 " | pumps have dual use applications and are on the 1051 list | 10-Dec-99 | Italy | Bevilacqua Costruzioni E Impianti S.P.A. |
The United States | On Hold | FIELD INSTRUMENTS WITH SPARES & METERING SYSTEM EQUIPMENT WITH SPARES | "$204,250.00 " | for technical specifications on the material composition of the hydraulic pump & the control valves | 10-Dec-99 | France | Fisher-Rosemount S.A. |
The United States | On Hold | PUMPS AND SPARE PARTS | "$994,085.00 " | item 1 (complete pump & motor set) has dual use applications and is on the 1051 list. | 11-Dec-99 | The Netherlands | Flowserve B.V. |
The United Kingdom; The United States | On Hold | "PUMP SET, MOTOR" | "$1,500,000.00 " | "US: for technical specifications on the pumps; UK: We have only received very limited information on this contract since we first requested it. Can the supplier provide more detailed tech specs, particularly in relation to the materials in contact with th" | 11-Dec-99 | Cyprus | Tussonia Limited - Cyprus |
The United States | On Hold | PUMPS COMPLETE WITH MOTORS/STEAM TURBINE | "$129,827.00 " | material composition of tanks | 16-Dec-99 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | SPARES FOR COMPRESSORS | "$41,159.30 " | technical specs on item 12 - oil pumps | 28-Dec-99 | Italy | Euroguar S.P.A. |
The United States | On Hold | UTILITIES & HANDLING EQUIPMENT | "$122,612.00 " | "US: items 2, 10, 36, 38 (dosing pumps) - dual use, items 3, 11, 21, 25, 28 (ss tanks) - dual use. " | 08-Jan-00 | Italy | Protechno Srl |
The United States | On Hold | CLARIFIERS WITH ACCESSORIES & RECOMMENDED SPARES. | "$795,000.00 " | "US: item #4 (chemical dosing pumps), item #9 (fiber glass pipe), item #7 (vacuum chlorine gas dosing device) & Item #18 (compressed air respirator w/bottle frame, breathing unit & panorama mask) on 1051 list." | 10-Jan-00 | UAE | Aqua Systems Trading Est. |
The United States | On Hold | EQUIPMENT FOR INDUSTRIAL WATER TREATMENT & STEAM GENERATION WITH SPARES | "$1,866,466.87 " | "for tech specs on #10, 65, 118. What is specific grade of stainless steel used in tank & metering pump #128, 130? Also detailed end use info" | 10-Jan-00 | France | Babcock Entreprise |
The United States | On Hold | MAINTENANCE OF ELECTRICAL SUBMERSIBLE PUMPS | "$338,039.00 " | technical specs on pumps and gas separators | 13-Jan-00 | Russian Federation | Alnas |
The United States | On Hold | TEST PUMPS & CLAMPS | "$78,888.64 " | items #1 &2 (test pumps) are on 1051 list | 27-Jan-00 | France | Trouvay & Cauvin |
The United States | On Hold | "WASH WATER, RECYCLE AND OIL VERTICAL PUMPS WITH SPARE PARTS" | "$561,950.40 " | "Provide requested specifications including material composition of all components and linings, type, drawing, rotation speed, maximum pressure, flow rate, dimensions, and weight for pump (item #67) and for the pumps that correspond to the impellers (items" | 18-Apr-00 | UAE | Harbour Maritime Services L.L.C |
The United States | On Hold | ROTATING EQUIPMENT W/SPARES | "$8,400,000.00 " | "US: need dimensions, weight, rotation speed & drawings for all pumps. " | 10-May-00 | Pakistan | Oil And Gas Services Group |
The United States | On Hold | "TRANSMISSION ASSY FOR LIFTING TRUCK, ENGINE & PUMPS WITH SPARES" | "$115,000.00 " | "Provide specifications on the pumps contained in the petrol filling pumps, including dimensions, weight, type material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed, and drawings (items #1 and 2 on contract)." | 18-Dec-00 | Jordan | Biergans 8 Thoutu |
The United States | On Hold | MECHNICAL EQUIPMENT COMPLETE WITH SPARES | "$118,782.54 " | "tech. specs/material composition of pumps, nozzles and micro-jet." | 06-Mar-00 | Jordan | Jocotren/The Jordan Cooperation |
The United States | On Hold | ANTI-POLUTION BOOMS & SKIMMERS WITH SPARES | "$30,540.00 " | "need material composition & lining for any tanks & hoses present in systems (item 1); specs for all pumps including dimensions, weight, type , material composition for all components & linings, flow reate, inlet/outlet pressure, rotation speed & drawings " | 11-May-00 | Jordan | Trading & Agriculture General Co. |
The United States | On Hold | FIRE FIGHTING VEHICLES WITH SPARES | "$472,299.17 " | "provide specifications on all associated pumps including flow rate, inlet/outlet pressure, material composition for all components and linings, rotation speed, dimensions, weight, and drawings; provide dimensions and material composition of all tanks incl" | 22-May-00 | France | Sides |
The United States | On Hold | FILTERS WITH SPARE PARTS | "$3,791,508.00 " | US: Purchase not directly related to repair of Iraqi oil infrastructure for the prupose of increasing exports. Plse provide material composition of item #60 (wax boot pump) & 61-70 (valves); | 24-May-00 | Jordan | Cessco: Chemical Supplies & Services Co. |
The United States | On Hold | MUD PUMPS | "$3,236,316.00 " | "for material composition of parts of pumps that contact liquid processed & tech & material specs on items #2, 2.1, 3, 3.1" | 01-Jun-00 | Jordan | Kts Trading Inc. |
The United States | On Hold | TEST PUMP WITH RECOMMENDED SPARES | "$215,500.00 " | Goods appear to be on 1051 list. OIP to provide tech info/assessments used to determine that goods are not subject to SCR 1051 | 06-Jun-00 | Lebanon | Mayss S.A.L. (Off Shore) |
The United States | On Hold | SPARES FOR DRILLING AND WORK OVER RIGS | "$116,358.00 " | For tech specs on item #1 & material composition of heat exchangers on item #2 & pump. Hold for material composition of item #3 pump | 06-Jun-00 | Lebanon | Mayss S.A.L. (Off Shore) |
The United States | On Hold | "HYDRAULIC PRESS,LATHE MACHINE/SPINDLE BORE,FILLING PUMP,JACK TROLLEY AND WHEEL ALIGNMENT WITH ELECTRONIC BALANCER." | "$95,500.00 " | "for tech specs on lathes & 60-ton capacity hydraulic press, petro filling pumps, gas oil filling pumps, laser computer alignment & computer balancer" | 08-Jun-00 | China | Hebei Machinery Import & Export Corp. |
The United States | On Hold | ROTATING MACHINERY FOR LPG PLANTS & SPARES(WATER PUMPS) | "$121,115.00 " | "US: provide specs for all pumps including dimensions, weight, material composition of each component, rotation speed and draqings (items #22 and #24); provide specs for the solenoid valve including dimensions, weight, material composition of each componen" | 13-Jun-00 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | PUMPS AND SPARES FOR CENTRIFUGAL PUMPS | "$216,602.04 " | material composition of impellers & shafts | 14-Jun-00 | France | Ingersoll Dresser Pompes France |
The United States | On Hold | VARIOUS APPARATUS AND EQUIPMENT WITH SPARES | "$31,563.50 " | "items on 1051 list: item 1 - freon detector - tab 10, p12, para 10.4.7, vacuum pump - tab 5, annex cm, p119, para 5 and acid resistant pumps - tab 10, p12, para 10.4.2, request tech info/assessments to determine goods are not SCR 1051 and hold for materia" | 26-Jun-00 | Korea | Subnex Technology Company |
The United States | On Hold | RECOEVERY AND LUBRICATING TRUCK | "$280,000.00 " | "US: provide specifications for the air operated oil and grease pumps and pressure washer pump including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings; provide t" | 12-Jul-00 | UAE | The Industrial Engineering And Metal |
The United States | On Hold | ROTATING MACHINERY FOR LPG PLANTS & SPARES | "$10,800.00 " | for technical specifications on the pumps | 24-Jul-00 | Egypt | Electrolab Co. |
The United States | On Hold | SPARE PARTS FOR DRILLING AND WORK OVER RIGS | "$2,500,000.00 " | "for tech specs for items 2, 3, 11-12, 22(valves), item 6 (vibration meter), item 49 (mud cleaner), items 69 (pump) 70 (centrifugal for line spray)" | 01-Aug-00 | Algeria | O.E.S. - Algeria |
The United States | On Hold | MOTORS AND PUMPS FOR MAINTENANCE | "$190,323.13 " | for tech specs on item #85 | 19-Aug-00 | Germany | Fag Intl Sales & Service Gmbh |
The United States | On Hold | ACTIVITY 53 | "$1,040,332.00 " | for material composition of pumps & parts | 07-Sep-00 | Italy | Pompe Gabbioneta Spa |
The United States | On Hold | DIESEL & ELECTRICAL DRIVEN CRUDE & WATER PUMPS | "$2,009,000.00 " | for material composition of pumps | 07-Sep-00 | Italy | Pompe Gabbioneta Spa |
The United States | On Hold | MATERIALS AND EQUIPMENT FOR MOTOR REWINDING WORKSHOP WITH SPARES | "$370,000.00 " | "US: provide specs for impregnating tanks w/pump incl. dim, material comp, description of operation & use, material comp of pump & specs for pump (possible 1051 items Tab 10, p 43, para2.4.5.3, tab 10, p 11,para 10.4.1) items #22, 23, 24; also provide spec" | 13-Sep-00 | UAE | Dome Oilfield Equipment & Services |
The United States | On Hold | ROTATING MACHINERY AND SPARES | "$150,284.00 " | for material composition of pumps | 19-Sep-00 | Italy | Meccanica Cremonini Snc Di Dario E Fabio Cremonini |
The United States | On Hold | PUMPS & SPARES FOR OILY WATER PUMPS | "$123,753.95 " | for tech specs of pumps & grade of stainless steel for all shafts & impellers | 23-Oct-00 | Lebanon | Mayss S.A.L. (Off Shore) |
The United States | On Hold | STORM WATER PUMP | "$61,537.64 " | provide a legible copy of the pump data sheets and individual weight of pumps if not included in the sheets. | 25-Oct-00 | Spain | Dogmoch Group |
The United States | On Hold | SPARES FOR FORKLIFTS | "$424,636.98 " | "US: provide specs for all pumps including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (items #112, #118, and #150); provide specs for all nozzles including fl" | 09-Nov-00 | Korea | Vidamco-Vietnam |
The United States | On Hold | FIRE FIGHTING TRUCKS W/SPARES | "$187,878.29 " | "Provide the size, weight, and drawings of the firewater pump; provide specifications for the vacuum pump including material composition, drawings, and flow rate; provide a completely legible copy of additional information. " | 29-Nov-00 | Turkey | Tekfen Insaat Ve Tesisat A.S. |
The United States | On Hold | "INSULATION OIL ELECTRIC TESTER, DETECTOR AND LOCATOR W/ INSULATOR" | "$53,259.51 " | US: provide specs for vacuum pump included with the oil treatment system including suction rate (in cubic meters per hour) and material composition for all components; provide specs for the deacidification unit including material composition for all comp | 28-Dec-00 | Sweden | P.T.E.C. Ab |
The United States | On Hold | SPARES FOR PUMPS | "$264,340.52 " | "US: need material composition for all impessers (items 21, 40, 49, 74, 96, 97, 120, 143); need specs for pumps for which spares are destined including dimensions, weight, type, material composition of all components, flow reate, inlte/outlet pressure, rot" | 28-Dec-00 | France | Envirotech Pumpsystems |
The United States | On Hold | CARBON DIOXIDE GENERATING PLANT AND SERVICES | "$272,223.88 " | "US: provide information on MEA use in Module-1; provide technical information for MEA pump listed in Module- and dosing pumps in Module- 3 to include, dimension, weight, type, material composition of all components and lining, flow rate, inlet and outlet" | 05-Jan-01 | Pakistan | Descon Eng. Ltd. |
The United States | On Hold | "PUMPS,COMPRESSORS,ROTARY MACHINES AND SPARES" | "$166,598.12 " | US: Purchase is not directly related to the repair of the Iraqi oil infrastructure for the purpose of increasing exports. | 09-Jan-01 | Cyprus | Techpower Corporation |
The United States | On Hold | ACTIVITY 53 | "$542,500.00 " | "Provide specifications for HGH 4/5 pump including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings (item #1); provide the dimensions, weight inlet/outlet pressures" | 23-Jan-01 | Germany | Ksb Aktiengesellschaft |
The United States | On Hold | ROTATING MACHINERY FOR LPG PLANTS | "$26,900.00 " | "Provide the specifications of the pump for which these parts are destined including dimensions, weight, type, material composition for all components and linings, flow rate, inlet/outlet pressure, rotation speed and drawings; provide material composition " | 29-Jan-01 | Turkey | "Avrasya, Technology Engineering & Cons. Inc." |